Flex Klebemörtel Keramischefliesen 25KG
Treverit Flex adhesive mortar (25KG)
C2 TE S1 according to DIN EN 12004, GISCODE: ZP 1, low-chromate according to TRGS EMICODE: EC 1RPlus according to GEV; abP checked
Scope of application:
• Indoor and outdoor walls and floors, balconies, terraces, underfloor heating
• for laying ceramic tiles and slabs, fine stoneware, porcelain mosaic, clinker and brick tiles as well as natural stone coverings that are insensitive to discoloration and deformation, on load-bearing substrates such as in-situ concrete (at least 6 months old), gypsum fiber boards, gypsum plasterboards, heated screeds (observe the relevant standards and data sheets) , mastic asphalt, aerated concrete
Characteristics:
• stable, flexible, plastic-coated
• Temperature resistance: -20°C to +80°C
• Storage: approx. 6 months in the original container, dry
Processing:
• Processing temperature: +5 °C to +25 °C (subsurface temperature)
• Ripening time: approx. 5 minutes
• Processing time: approx. 3 hours
• Insertion time: approx. 30 minutes
• accessible/accessible: after approx. 24 hours
• Adhesive bed thickness: max. 10 m
consumption
• 3 mm toothing approx. 0.9 kg/m²
• 4 mm toothing approx. 1.2 kg/m²
• 6 mm teeth approx. 1.8 kg/m²
• 8 mm teeth approx. 2.3 kg/m
Color
• Grey, powder
C2 TE S1 according to DIN EN 12004, GISCODE: ZP 1, low-chromate according to TRGS EMICODE: EC 1RPlus according to GEV; abP checked
Scope of application:
• Indoor and outdoor walls and floors, balconies, terraces, underfloor heating
• for laying ceramic tiles and slabs, fine stoneware, porcelain mosaic, clinker and brick tiles as well as natural stone coverings that are insensitive to discoloration and deformation, on load-bearing substrates such as in-situ concrete (at least 6 months old), gypsum fiber boards, gypsum plasterboards, heated screeds (observe the relevant standards and data sheets) , mastic asphalt, aerated concrete
Characteristics:
• stable, flexible, plastic-coated
• Temperature resistance: -20°C to +80°C
• Storage: approx. 6 months in the original container, dry
Processing:
• Processing temperature: +5 °C to +25 °C (subsurface temperature)
• Ripening time: approx. 5 minutes
• Processing time: approx. 3 hours
• Insertion time: approx. 30 minutes
• accessible/accessible: after approx. 24 hours
• Adhesive bed thickness: max. 10 m
consumption
• 3 mm toothing approx. 0.9 kg/m²
• 4 mm toothing approx. 1.2 kg/m²
• 6 mm teeth approx. 1.8 kg/m²
• 8 mm teeth approx. 2.3 kg/m
Color
• Grey, powder
You may also like