Floor Tiles Jupiter Marble Optic Ivory Polished 80x80cm
€40.90*
No longer available
The floor tile Jupiter in the color version Ivory in the format 80x80cm has a beautiful marble look. The size has a calm and uniform effect on the room. Even small rooms get a visual enlargement.
The surface is glazed and polished, making the porcelain stoneware easy to care for. Dirt cannot easily penetrate into the pores. Polishing keeps the marble look tile from appearing slippery. Porcelain stoneware also protects the floor against abrasion and wear and tear. With a tile thickness of 9 millimeters, it supports the positive properties of the floor tile.
Jupiter floor tile is robust and can therefore be used in two ways, as a floor and wall tile. Particularly suitable for floors with underfloor heating. A high firing temperature of 1,200 degrees Celsius promotes the stability of the tile. The low water absorption capacity makes porcelain stoneware suitable for outdoor use. The tile is frost-proof in winter. The floor tile is rectified. This means that the seams have a straight uniform edge at 90 degrees. The advantage of these machine edges is that the tiler has the opportunity to lay narrow joints.
-
Glazed
- Glazed tiles achieve their distinctive surface appearance through a glaze, which involves applying a glass-like layer.
-
Glazed tiles are suitable for use on walls and floors in residential areas.
-
Polished
- The matte surface is mechanically treated to achieve a high gloss finish. It is important to check whether the surface has already been factory-treated with a stain protector or if this needs to be applied after installation. Manufacturer's instructions should always be followed.
-
Underfloor Heating
-
Suitable for underfloor heating when installed correctly.
-
Suitable for underfloor heating when installed correctly.
-
Rectified
-
The edges are precisely ground to a uniform caliber. For rectified tiles, the tolerance of the edges is 50% lower than that of tiles with pressed edges. A special feature is the exact 90° angle of the edge, which allows for installation with a joint width starting from 2 mm.
-
The edges are precisely ground to a uniform caliber. For rectified tiles, the tolerance of the edges is 50% lower than that of tiles with pressed edges. A special feature is the exact 90° angle of the edge, which allows for installation with a joint width starting from 2 mm.
Login
Reviews can only be submitted while being logged in. Please enter your login details below. New customer?
Please sign in below to find out the answer. New Customer?
Questions & Answers (0)
If you have further questions, please do not hesitate to contact us.
Samples information:
Mosaic samples are delivered in a size of approx. ca. 10x10cm, Tile samples are cut out of the specified tile in a size of max. 30x60cm and can not be changed or returned
Hint:
Every tile and every mosaic have different requirements for trimming, laying and und processing due to individual material characteristics and usage conditions. Please ask a local expert for correct and secure laying of your mosaics or tiles. We are not liable for unprofessional usage and faulty workmanship of constructions materials.
Due to different color calibration of the monitors on the computer, there may be color deviations. The exposure of the product images also has an influence on the displayed colors. Please note, however, that we have slightly adjusted the color of very white or light-colored tiles for better representation.
You may also like
Similar Products