Floor Tiles Haarlem Graphit 30x60cm
€37.90*
No longer available
The Haarlem Graphite floor tiles are stone-look tiles with a simple, very modern design. They are rectified, i.e. they have a uniform edge length. This means that these porcelain stoneware tiles can be laid with a minimally large joint of 1.5 to 2 mm. Due to these hardly visible joints, the entire tile pattern of the stone look tiles appears uniform and even more elegant. Due to a variety of properties such as frost resistance and suitability for underfloor heating, the Haarlem floor tiles can be used both inside and outside. They decorate all areas of daily life and ensure stylish living all year round, whether in the living room or on the terrace.
Due to the matt, glazed surface, these floor tiles provide a restrained elegance and are still very easy-care porcelain stoneware tiles. Of course, these category R9 stone look tiles can also be laid in the kitchen, hallway or bathroom without any problems, as they also guarantee a slight slip resistance here.
Indoor and outdoor areas are optimally staged with these fine stoneware tiles, temperature-independent and non-slip. In addition, the rectification ensures easy laying with almost invisible joints.
-
Slip Resistance R9
- Inclination angle 6-10°
- Low slip resistance value, suitable for stairs, dining areas, entrance areas, hospital wards, or medical offices.
-
Abrasion 4
- High usage
- Suitable for flooring in areas with intense use, such as kitchens, hallways, living rooms, offices, on terraces, and in all spaces that are heavily used.
-
Glazed
- Glazed tiles achieve their distinctive surface appearance through a glaze, which involves applying a glass-like layer.
-
Glazed tiles are suitable for use on walls and floors in residential areas.
-
Underfloor Heating
-
Suitable for underfloor heating when installed correctly.
-
Suitable for underfloor heating when installed correctly.
-
Rectified
-
The edges are precisely ground to a uniform caliber. For rectified tiles, the tolerance of the edges is 50% lower than that of tiles with pressed edges. A special feature is the exact 90° angle of the edge, which allows for installation with a joint width starting from 2 mm.
-
The edges are precisely ground to a uniform caliber. For rectified tiles, the tolerance of the edges is 50% lower than that of tiles with pressed edges. A special feature is the exact 90° angle of the edge, which allows for installation with a joint width starting from 2 mm.
Login
Reviews can only be submitted while being logged in. Please enter your login details below. New customer?
Please sign in below to find out the answer. New Customer?
Questions & Answers (0)
If you have further questions, please do not hesitate to contact us.
Samples information:
Mosaic samples are delivered in a size of approx. ca. 10x10cm, Tile samples are cut out of the specified tile in a size of max. 30x60cm and can not be changed or returned
Hint:
Every tile and every mosaic have different requirements for trimming, laying and und processing due to individual material characteristics and usage conditions. Please ask a local expert for correct and secure laying of your mosaics or tiles. We are not liable for unprofessional usage and faulty workmanship of constructions materials.
Due to different color calibration of the monitors on the computer, there may be color deviations. The exposure of the product images also has an influence on the displayed colors. Please note, however, that we have slightly adjusted the color of very white or light-colored tiles for better representation.
You may also like
Similar Products